Gasanalyse

ZCS Zirkoniumdioxid-Sonde

The ZCS Carbon Probe is a resilient in situ analyser, intended to be used to control the carbon potential of an endothermic or Nitrogen/Methanol based heat treating atmosphere. The patented electrode design and the special used alloy, reduce the contact area with Zirconia. This solution increases the probe service life, reduces carbon built up and guarantees a very fast response time. 

The ZCS Carbon Probe is a resilient in situ analyser, intended to be used to control the carbon... mehr
Produktinformationen "ZCS Zirkoniumdioxid-Sonde"

The ZCS Carbon Probe is a resilient in situ analyser, intended to be used to control the carbon potential of an endothermic or Nitrogen/Methanol based heat treating atmosphere. The patented electrode design and the special used alloy, reduce the contact area with Zirconia. This solution increases the probe service life, reduces carbon built up and guarantees a very fast response time. 

 

ZCS Carbon Probe, located directly in the furnace heat zone, responds almost immediately to changes in the carburizing atmosphere and totally eliminate the need for gas sampling system

 

Measureable Gas

Carbon Potential [%C]

 

Main Features

Extreme Roughness

- Ideal for use in carburizing, neutral hardening and gas generator applications.

- Resistant to sooting

- Equipped with purge port for probe burn-off

- Special selected Alloy sheath

- Resistant Alloy electrode welded to the metal sheath, acting like a lead wire. Failure of this system is virtually impossible.

 

Easy to Use

- Thermal and mechanical toughness makes the probe suitable to be installed and removed in very short time

- Optional integral thermocouple

- Set of adapters and joints to adapt the probe length to every mounting

 

Low Costs of Ownership

- Easy replacement with all first and second generation probes on the market

- Reconditioning and certification service with fest delivery time to reduce plant stop to the minimum

 

European Compliance

- Low Voltage Directive 2014/35/EU

- EMC Directive 2014/30/EU

Spezifikation

Technical Specification

Measuring Principle

Zirconium Oxide (Zirconia)

Accuracy

± 0.03% in carbon weight within the used range

Response Time

less than 2 sec.

Output Signal

1000 ÷ 1300 mV (0.01 ÷ 1.6% C)

Type of Thermocouples

Type K, B, S (optional)

TC Output

E.M.F. function of the temperature

Impedance

Connect the probe to external devices with impedance 10 MΩ or higher

Wiring Connections

ZCS3: plug-in connector (male and female included)

ZCS4: cable gland for cable max. 10 mm and inner terminal strip

Pneumatic Connections

Reference and purge air inlet: 1/8” NPT-F

Temperature Range

700°C to 1050°C

Head Temperature

Max. 150°C

Reference Air

Dry, clean and oil-free air. Flow rate: 50…100 cc/min.

Purge Air

Dry, clean and oil-free air. Flow rate: 2000 cc/min.

Process Connection

1” NPT

Sheath diameter

27 mm

Sheath Material

Special Alloy (field tested for long operation)

Weitere Infos

Applications

- Carbon potential control of an endothermic heat treating atmosphere

- Carbon potential control of Nitrogen/Methanol based endothermic heat treating atmosphere

- Carburizing atmosphere

 

Measuring Principle

The measuring principle on which the analysis is based is linked to the use of Zirconium oxide which, at high temperatures, can behave like a solid state electrolyte, developing an electromotive force on two electrodes placed in contact with different O2 concentrations (partial pressures), proportional to the temperature in Kelvin degrees (°K) and the logarithm of the ratio between the two pressures PO2’ and PO2” in accordance with Nernst’s well-know ratio:

 

E = RT / nF (Lg P02’ / P02“)

 

Where:       

R = Perfect gas constant (8,31 Joule/degree bulk)

F = Faraday’s constant

T = Absolute temperature in °Kelvin

n = 4


6801 Zirkoniumoxid Rauchgasanalysator
Gasanalyse
6801 Zirkoniumoxid Rauchgasanalysator
Designed to measure Oxygen in flue gas for combustion efficiency and fuel...
Details
MiniProbe M7873 Zirkoniumoxid Rauchgasanalysator
Gasanalyse
MiniProbe M7873 Zirkoniumoxid Rauchgasanalysator
Self-heated probe, designed to measure Oxygen in flue gas (up to 700°C) for...
Details
7873 Zirkoniumoxid Rauchgasanalysator
Gasanalyse
7873 Zirkoniumoxid Rauchgasanalysator
Self-heated probe, designed to measure Oxygen in flue gas (up to 700°C)....
Details
8863 Thermoparamagnetischer Sauerstoffanalysator
Gasanalyse
8863 Thermoparamagnetischer Sauerstoffanalysator
Rugged Oxygen analyser for inerting control and heavy-duty applications....
Details
8864 Zirkoniumoxid Sauerstoffanalysator
Gasanalyse
8864 Zirkoniumoxid Sauerstoffanalysator
Rugged Zirconia analyser for ppm or % Oxygen measurements in combustion...
Details
8866 Wärmeleitfähigkeits-Analysator
Gasanalyse
8866 Wärmeleitfähigkeits-Analysator
8866 is an analyzer for harsh environment that allows very accurate and...
Details
8867 Analysegerät für Brennbare Stoffe
Gasanalyse
8867 Analysegerät für Brennbare Stoffe
Based on catalytic combustion system, the 8867 provides accurate in line...
Details
8869 Infrarot Multi-Gas-Analysator
Gasanalyse
8869 Infrarot Multi-Gas-Analysator
8869 is a rugged process analyser for measuring up to 3 IR-absorbing gases...
Details
8870 Zirkoniumoxid Sauerstoffanalysator
Gasanalyse
8870 Zirkoniumoxid Sauerstoffanalysator
Rugged Zirconia analyser for ppm or % Oxygen measurements in combustion...
Details
AtLAS-700 TDLAS Analysator
Gasanalyse
AtLAS-700 TDLAS Analysator
AtLAS-700 is a rack type tunable laser gas analyser for industrial on line...
Details
AtLAS-900 Extractive TDLAS Analysator
Gasanalyse
AtLAS-900 Extractive TDLAS Analysator
AtLAS-900 is a laser gas analyser for industrial on line applications, able...
Details
AtLAS-900 in Situ TDLAS Analysator
Gasanalyse
AtLAS-900 in Situ TDLAS Analysator
AtLAS-900 is a laser gas analyser for industrial on line applications, able...
Details
EC2000 Universal-Sauerstoffanalysator
Gasanalyse
EC2000 Universal-Sauerstoffanalysator
EC2000 series is the entry level of O2 product range for the measurement of...
Details
M702 Auswerteeinheit
Gasanalyse
M702 Auswerteeinheit
Powerful microprocessor-based system (keyboard configurable) allowing...
Details
Oxy Pink Zirkoniumoxid-Rauchgasanalysator
Gasanalyse
Oxy Pink Zirkoniumoxid-Rauchgasanalysator
OxyPink is a highly innovative Zirconia probe, the only one able to measure...
Details
Multi-Flue UV-DOAS Analysator
Gasanalyse
Multi-Flue UV-DOAS Analysator
Multi Gas analyser based on UV DOAS and chemometrics algorithms (PLS), able...
Details
Ozzo-3 UV-Spektrometrie-Analysator
Gasanalyse
Ozzo-3 UV-Spektrometrie-Analysator
Ozzo-3 analyser adopts ultraviolet spectrometry principle and, combined with...
Details
P8863 Paramagnetischer Sauerstoffanalysator
Gasanalyse
P8863 Paramagnetischer Sauerstoffanalysator
Robust analyser for safe and hazardous areas, suitable for Oxygen enriched...
Details

Unsere Stellenangebote
Wir suchen Verstärkung!
Bewerben Sie sich - Wir freuen uns auf Sie