Vorschau: Rapidox 7100 Syngas Analysator

Gasanalyse

Rapidox 7100 Syngas Analysator

The Rapidox 7100 Syngas Analyser is a high specification benchtop or rack mountable instrument designed for the analysis and calculation of calorific value for syngas produced from the gasification of waste material at high temperature in an environment low in oxygen, either in a research laboratory or on-site.

Please contact us for further versions and options

zurück zur Übersicht

Angebot anfordern

The Rapidox 7100 Syngas Analyser can be used in a laboratory or on-site for the analysis of... mehr

Zurück

Produktinformationen "Rapidox 7100 Syngas Analysator"

The Rapidox 7100 Syngas Analyser can be used in a laboratory or on-site for the analysis of syngas (after sample conditioning / clean up) from the pipework leading to a CHP engine for either:

• biomass fuels - such as wood chips and digestate - via gasification or

• non-biomass fuels - such as tyre crumbs, plastics, metal coated plastics and foams - via cracking. It will measure both gas content (H2, CO, CH4, CO2 and O2) and energy content (calorific value, CV) for the syngas sampled; up to six gases can be measured simultaneously meaning that other gases can be analysed as well, if required. The Rapidox 7100 Syngas Analyser is available as either a benchtop version for the laboratory or in a 19" rack mountable case which can be housed in a suitable enclosure for use in an external or hazardous area.

The pump enables two modes of operation:

• for gas samples at atmospheric pressure or below, the pump is activated to draw a sample through the analyser.

• from gas samples at greater than atmospheric pressure, the pump can be deactivated to allow gas to flow through the analyser; gas flow is regulated manually via a rotary knob on the fascia and displayed electronically on the screen.

mehr

Zurück

Spezifikation

H2 (hydrogen)	0-100% TCD sensor with background gas correction. ±1% full scale accuracy. 0.1% resolution
CO (carbon dioxide)	0-2000ppm, 0-2%, 0-10% or 0-100% Infra-red sensor. ±1% full scale accuracy. 0.1% resolution
CH4 (methane)	0-5% (LEL) or 0-100% Infra-red sensor. ±1% full scale accuracy. 0.1% resolution
CO2 (carbon monoxide)	0-5000ppm, 0-5%, 0-20% or 0-100% Infra-red sensor. ±1% full scale accuracy. 0.1% resolution
O2 (oxygen)	0-30% or 0-100% electrochemical sensor. ±1% full scale accuracy. 0.01% resolution
Other gases	Contact us for further information
Normal Operating Conditions	Temperature 0°C to 40°C / Humidity 10 - 90% RH / Pressure 900 to 1100 mbar absolute.
Sampling	Fixed or continuous sampling modes
Warm-up Time	3-4 minutes at 20°C
Voltage Outputs	0-10V, user programmable
Current Outputs	4-20mA linear, user programmable
Digital Outputs	RS232 (RS485 option available) Data streamed on demand. Modbus RTU/Ethernet
Data Output	Excel compatible data via USB memory stick
Alarms	Relay circuits, user programmable
Sample Connections	6mm OD or 1/4" Swagelok fittings. Rear positioning
Calibration	Calibration by the user using zero and span gases An optional Auto-Cal system can be installed on certain models
Display	7" (180mm) full-colour LCD with touchscreen operation; resolution 0.01ppm or 0.01%
Supply Voltage	90-260 VAC, 50/60Hz
Analyser Dimensions	Rack Mount: 132mm(H) x 482mm(W) x 365mm(D) / Benchtop: 180mm (H) x 570mm (W) x 345mm (D)
Weight	Rack Mount: 6.5kg / Benchtop: 6.5kg